FARWEST PAINT PRODUCT INFORMATION
Primers & Pre-Treatment Coatings
#1016 Aluminum Rust Resistor Primer & Finish Coat
PRODUCT TYPE: Alkyd Rust-Inhibiting Primer. (Semi-Gloss)
DESCRIPTION: A high quality primer designed to provide maximum rust prevention. A combination of specially processed oils bind the rust to the metal excluding water and air which are the main cause of rust or corrosion.
Intended Use: Primer and finish coat for new or rusted metal. Used by steel fabricators and the marine industry.
VISCOSITY: 50 k.u.
DRY TO TOUCH: 1/2-1 hour
WEIGHT SOLIDS: 44-46%
TACK FREE: 4-6 hours
VOLUME SOLIDS: 38-40%
TIME TO RECOAT: 6-12 hours
WEIGHT PER GALLON: 8.02 lbs. per gal.
DRY HARD: 8 hours
V.O.C.: 444 grams per liter
COLOR RANGE: Aluminum
FLASH POINT: 102° F.
PACKAGING: 1 or 5 gallon containers
PRACTICAL COVERAGE: 350-450 square feet per gallon for brushing or rolling. 300-400 square feet per gallon for spraying.
SURFACE PREPARATION: Surface to be coated must be free of all loose dirt or scaling paint and any other foreign material. All loose rust scales should be removed either by wire brushing, light sandblasting or with Farwest #695 Rynolite Chemical Cleaner-Etcher.
APPLICATION: Brush, roller, or airless or conventional spray. Note: When spraying with conventional cup gun, the viscosity of the material should be reduced within the range of 20"-25" on a Zahn Cup.
THINNING: Thin if necessary with Farwest #605 Synthetic Thinner or #602 Mineral Spirits.
CLEAN-UP: Equipment and tools may be cleaned with Farwest #602 Mineral Spirits, #605 Synthetic Thinner or #615 Wash Thinner.
LIMITED WARRANTY. To the best of our knowledge, the technical data presented above is true and accurate at the date of issuance and subject to change without prior notice. Farwest Paint Manufacturing Co. guarantees its products to conform to its standards of quality control. Liability is limited to replacement of product. No other warranty or guarantee of any kind is made by Farwest Paint Manufacturing, implied or otherwise.