FARWEST PAINT PRODUCT INFORMATION

Industrial Finish Coatings

#1100 Series Wonderglo® QuickSet Hi-Performance Enamel

(#1100 White/#1110 Deep Base/#1115 Ultra Deep Base/ X-4364 Machinery Gray)

COLOR(S): White, Machinery Gray, or Tints.

PRODUCT TYPE: Pigmented Gloss Alkyd Enamel.

DESCRIPTION: A durable, high grade alkyd enamel for use on primed exterior or interior wood or metal. Excellent as a machinery enamel for bulldozers, tractors, forklifts, heavy equipment, in shops and for color marking or coding. It has proven its performance in industrial and commercial maintenance fields, where frequent washing is necessary, and when used as a gloss interior or exterior enamel for wood surfaces where a high degree of gloss is required.

Intended Use: Enamel for machinery, bulldozers, tractors, heavy equipment, color marking, color coding, or wood surfaces.

PHYSICAL CHARACTERISTICS

VISCOSITY: 65-70 k.u.

DRY TO TOUCH: 30 minutes

WEIGHT SOLIDS: 51-59% depending upon color*

TACK FREE: 3-4 hours

VOLUME SOLIDS: 41-44% depending upon color*

TIME TO RECOAT: Overnight

WEIGHT PER GALLON: 7.70-9.20 lbs. per gal.

DRY HARD: 6 hours

V.O.C.: 444 grams per liter

COLOR RANGE: White, Machinery Gray or Tints

FLASH POINT: 50° F.

PACKAGING: 1 or 5 gallon containers

BATCH: Stock

PRACTICAL COVERAGE: 300-500 square feet per gallon depending on application.

* Contact Farwest Paint for specific weight solids and volume solids % for individual colors.

SURFACE PREPARATION: Surface must be clean, dry, properly prepared and free of dirt, grease, or loose chipping paint and particles. New or Bare Surfaces: Should be primed with a suitable primer before applying finish coat.

APPLICATION:` Apply evenly to the properly prepared surface with suitable airless or conventional equipment. Note: This material needs little or no reducing for airless. The consistency has been formulated to provide best results from full-body application. This product is not normally recommended for brushing and rolling due to its quick-drying characteristic.

THINNING: No thinning is necessary for airless application. For conventionaly spray normally a 3:1 reduction with Farwest #605 Synthetic Thinner is adequate to provide sufficient atomization (depending on the type of equipment used, dilution ratios may differ).

CLEAN-UP: Tools and equipment may be cleaned with Farwest #605 Synthetic Thinner or Farwest #615 Wash Thinner.

LIMITED WARRANTY. To the best of our knowledge, the technical data presented above is true and accurate at the date of issuance and subject to change without prior notice. Farwest Paint Manufacturing Co. guarantees its products to conform to its standards of quality control. Liability is limited to replacement of product. No other warranty or guarantee of any kind is made by Farwest Paint Manufacturing, implied or otherwise.