FARWEST PAINT PRODUCT INFORMATION
#40 Vitanic Black Iron Paint (Interior/Exterior)
PRODUCT TYPE: Gilsonite Varnish.
DESCRIPTION: A weather-proof, elastic, iron paint for interior or exterior application. It seals out rust-causing air and water and develops excellent adhesion to a variety of metal surfaces, including new or rusted steel or aluminum surfaces. MEETS SPECS.: TT-V-51, A-A-1632 COLOR NO. 17038.
Intended Use: For new or rusted steel, or aluminum surfaces.
VISCOSITY: 46"-60" (FORD 4)
DRY TO TOUCH: 1-3 hours
WEIGHT SOLIDS: 39-41%
TACK FREE: 8-12 hours
VOLUME SOLIDS: 36-38%
TIME TO RECOAT: 24 hours
WEIGHT PER GALLON: 7.30 lbs. per gal.
DRY HARD: 24 hours
V.O.C.: 525 grams per liter
COLOR RANGE: Black
FLASH POINT: 105° F.
PACKAGING: 1 or 5 gallon containers
PRACTICAL COVERAGE: 300-500 square feet per gallon depending upon application method, porosity and smoothness of surface.
SURFACE PREPARATION: Remove loose rust with Farwest #695 Rynolite Chemical Cleaner-Etcher and wire brush. Surface should be free of foreign particles and contaminants. Galvanized surfaces should be treated with a phosphoric etch before applying product.
APPLICATION: Stir thoroughly. Brush, roller, or spray.
THINNING: Product should not be thinned unless absolutely necessary. Thin, if necessary, with Farwest #602 Mineral Spirits.
CLEAN-UP: Tools and equipment may be cleaned with Farwest #602 Mineral Spirits.
LIMITED WARRANTY. To the best of our knowledge, the technical data presented above is true and accurate at the date of issuance and subject to change without prior notice. Farwest Paint Manufacturing Co. guarantees its products to conform to its standards of quality control. Liability is limited to replacement of product. No other warranty or guarantee of any kind is made by Farwest Paint Manufacturing, implied or otherwise.