FARWEST PAINT PRODUCT INFORMATION

Aluminum & High-Heat Coatings

X-4353 High-Heat Silicone Aluminum Paint

COLOR(S): Aluminum.

PRODUCT TYPE: High-Heat Silicone Aluminum Paint.

DESCRIPTION: A premium, high-heat aluminum paint which, when applied to metal surfaces, will withstand temperatures up to 1200° F. Widely used on boilers, radiators and exhaust stacks. Complies with Federal Spec. TT-P-28.

Intended Use: For marine use, radiators, boilers, exhaust stacks, tools, or industrial equipment.

 PHYSICAL CHARACTERISTICS

VISCOSITY: 55 k.u.

DRY TO TOUCH: 15-30 minutes

WEIGHT SOLIDS: 44-46%

TACK FREE: 1-2 hours

VOLUME SOLIDS: 31-33%

TIME TO RECOAT: Overnight

WEIGHT PER GALLON: 9.5 lbs. per gal.

DRY HARD: 2 hours

V.O.C.: 531 grams per liter

COLOR RANGE: Aluminum

FLASH POINT: 80° F.

PACKAGING: 1 or 5 gallon containers

BATCH: Stock

PRACTICAL COVERAGE: 300-400 square feet per gallon depending on the surface.

SURFACE PREPARATION: Surface to be painted must be free of all dirt, grease and foreign substances prior to application. New metal should be etched with Farwest #695 Rynolite Chemical Cleaner-Etcher prior to painting to insure a good tight bond of the paint film to the substrate.

 APPLICATION: Brush, roller, or spray.

THINNING: Thin if necessary with Farwest #605 Synthetic Thinner.

CLEAN-UP: Tools and equipment may be cleaned with Farwest #605 Synthetic Thinner or Farwest #615 Wash Thinner.

LIMITED WARRANTY. To the best of our knowledge, the technical data presented above is true and accurate at the date of issuance and subject to change without prior notice. Farwest Paint Manufacturing Co. guarantees its products to conform to its standards of quality control. Liability is limited to replacement of product. No other warranty or guarantee of any kind is made by Farwest Paint Manufacturing, implied or otherwise.