FARWEST PAINT PRODUCT INFORMATION

Aluminum & High-Heat Coatings

X-4915 High-Heat Black Silicone Enamel

COLOR(S): Black.

PRODUCT TYPE: Modified Silicone Alkyd Enamel.

DESCRIPTION: A premium high-heat silicone paint which will withstand temperatures in excess of 400° F. It is pigmented with a very fine quality Carbon Black which will not turn brown or gray when exposed to extreme high heat. Some suggested use areas are for engines, appliances, stoves, heat registers or any type of equipment which is exposed to high temperatures. Farwest X-4915 High-Heat Black Silicone Enamel performs well on exterior exposures because of the Silicone Resin which it is based on.

Intended Use: For marine use, engines, stoves, appliances, heat registers, or exterior exposures.

PHYSICAL CHARACTERISTICS

VISCOSITY: 55-60 k.u.

DRY TO TOUCH: 15-30 minutes

WEIGHT SOLIDS: 48-50%

TACK FREE: 2 hours

VOLUME SOLIDS: 35-37%

TIME TO RECOAT: 4 hours

WEIGHT PER GALLON: 9.07 lbs. per gal.

DRY HARD: 4 hours

V.O.C.: 550 grams per liter

COLOR RANGE: Black

FLASH POINT: 80° F.

PACKAGING: 1 or 5 gallon containers

BATCH: Stock

PRACTICAL COVERAGE: 250 square feet per gallon depending on surface to be coated.

SURFACE PREPARATION: Apply to a clean, dry, properly prepared surface free of oil and grease.

APPLICATION: For best results, apply with conventional cup gun or airless spray.

THINNING: Thin with Farwest #605 Synthetic Thinner.

CLEAN-UP: Tools and equipment may be cleaned with Farwest #605 Synthetic Thinner or Farwest #610 Lacquer Thinner.

 LIMITED WARRANTY. To the best of our knowledge, the technical data presented above is true and accurate at the date of issuance and subject to change without prior notice. Farwest Paint Manufacturing Co. guarantees its products to conform to its standards of quality control. Liability is limited to replacement of product. No other warranty or guarantee of any kind is made by Farwest Paint Manufacturing, implied or otherwise.