FARWEST PAINT PRODUCT INFORMATION

Exterior Finish Coatings

#5500 Wonderflex Elastomeric Acrylic Coating

COLOR(S): White and Tints.

PRODUCT TYPE: Highly Elastic Pure Acrylic Pigmented Coating.

DESCRIPTION: A high solids, extremely flexible coating for wood, concrete or metal surfaces and roof surfaces such as asbestos asphalt tile, hot-mopped tar, elastomeric aluminum, galvanized metal roofs, and fiberglass and wood shingles. It is a high-build coating that provides long term flexibility, resistance to salt water spray and pooling water and excellent adhesion to previously-coated surfaces. A unique feature of White Wonderflex is its ability to reflect the sun’s heat which helps reduce air conditioning costs during hot summer months. Excellent product to use when coating roof for the first time or recoating a weather-worn roof.

Intended Use: For wood, concrete, metal, or roof surfaces.

PHYSICAL CHARACTERISTICS

VISCOSITY: 98-102 k.u.

DRY TO TOUCH: 45 minutes-1 hour

WEIGHT SOLIDS: 63-65%

TACK FREE: 3 hours

VOLUME SOLIDS: 49-51%

TIME TO RECOAT: 18 hours

WEIGHT PER GALLON: 11.86 lbs. per gal.

DRY HARD: 8 hours

V.O.C.: 75 grams per liter

COLOR RANGE: White and Tints

FLASH POINT: N/A

PACKAGING: 1 or 5 gallon containers

PRACTICAL

BATCH: Stock

COVERAGE: 65-70 square feet per gallon.

SURFACE PREPARATION: The surface to be coated must be free of all dirt, oil, grease and chipping paint.

APPLICATION: Brush, roller, or spray. Apply the first coat at the rate of 3-5 mils (approximately 150 square feet per gallon), let dry and apply a second coat at the rate of 65-70 square feet per gallon to equal 10-15 mils coverage. It is advisable to build the film in 2 coats to avoid "mud-cracking and film sagging". New Wood: Prime with Farwest #710 White Linseed Oil Primer. New Metal Surfaces: Prime with Farwest X-1184 Red Oxide Primer. On new surfaces it is recommended that the first coat be thinned approximately 5-10% with regular clean tap water. The second coat does not need to be thinned. NOTE: Wonderflex is not recommended for walking surfaces.

THINNING: Thin with regular clean tap water only as necessary for even flow.

CLEAN-UP: Tools and equipment may be cleaned with warm, soapy water.

LIMITED WARRANTY. To the best of our knowledge, the technical data presented above is true and accurate at the date of issuance and subject to change without prior notice. Farwest Paint Manufacturing Co. guarantees its products to conform to its standards of quality control. Liability is limited to replacement of product. No other warranty or guarantee of any kind is made by Farwest Paint Manufacturing, implied or otherwise.