FARWEST PAINT PRODUCT INFORMATION
X-6131 Fish-Eye Eliminator
PRODUCT TYPE: Silicone Additive.
DESCRIPTION: This product is a highly potent additive designed to be used as a post-add correction to eliminate fish-eyes, craters, color float, and to impart slip to films of clear and pigmented lacquers and two-component urethanes. It is to be added with extreme care, as overdosing the product with this material may impart a variety of surface problems such as loss of intercoat adhesion, adhesion to substrate, too slippery of a surface, and possibly yellowing of clear films. Follow manufacturers recommended directions for use very closely.
VISCOSITY: 10" (FORD #4)
DRY TO TOUCH: N/A
WEIGHT SOLIDS: 25%
TACK FREE: N/A
VOLUME SOLIDS: 22%
TIME TO RECOAT: N/A
WEIGHT PER GALLON: 7.70 lbs. per gal.
DRY HARD: N/A
V.O.C.: 923 grams per liter
COLOR RANGE: Clear
FLASH POINT: 15° F.
PACKAGING: 1 or 5 gallon containers
PRACTICAL COVERAGE: N/A
SURFACE PREPARATION: N/A.
APPLICATION: To reduce tendency of lacquer and/or urethane finish to fish-eye in application: Add 1-2 tablespoons per gallon of paint, not to exceed 4 tablespoons. To add slip to the finished surface: Add up to 3-4 tablespoons per gallon of paint. DO NOT add to the primer or intermediate coat, except at levels below 2 tablespoons per gallon of paint.
CLEAN-UP: Clean tools thoroughly with Farwest #610 Lacquer Thinner.
LIMITED WARRANTY. To the best of our knowledge, the technical data presented above is true and accurate at the date of issuance and subject to change without prior notice. Farwest Paint Manufacturing Co. guarantees its products to conform to its standards of quality control. Liability is limited to replacement of product. No other warranty or guarantee of any kind is made by Farwest Paint Manufacturing, implied or otherwise.