FARWEST PAINT PRODUCT INFORMATION

Exterior Finish Coatings

#800 Series Alkyd Oil House Paint (Exterior)

(#800 White/#810 Deep Base/#820A Yellow Base/#825 Ultra Deep Base/#835 Neutral Base)

COLOR(S): White and Tints.

PRODUCT TYPE: Oil Modified Alkyd.

DESCRIPTION: An outstanding exterior alkyd finish modified with heavy bodied oil and the highest quality pigments to provide an even flat finish. This product is designed for use on shakes, shingles, rustic siding, cedar, T-111 batten fences and trellises. A breathing type paint, which is highly blister resistant and durable.

Intended Use: For shakes, shingles, rustic siding, cedar, T-111 batten fences, trellises.

PHYSICAL CHARACTERISTICS

VISCOSITY: 82-83 k.u.

DRY TO TOUCH: 45 minutes-1 hour

WEIGHT SOLIDS: 69-76%

TACK FREE: 4-5 hours

VOLUME SOLIDS: 51-57%

TIME TO RECOAT: 24 hours

WEIGHT PER GALLON: 10.8-11.8 lbs. per gal.

DRY HARD: 8 hours

V.O.C.: 353 grams per liter

COLOR RANGE: White and Tints

FLASH POINT: 105° F.

PACKAGING: 1 or 5 gallon containers

BATCH: Stock

PRACTICAL COVERAGE: 200-300 square feet per gallon depending on the surface to be coated.

SURFACE PREPARATION: All surfaces should be clean, dry and free of foreign agents. Previously-painted surfaces: All loose, chipping, peeling paint should be removed by scraping or water blast.

 APPLICATION: Brush, roller, or airless spray.

 THINNING: Thinning is not usually needed for brush or roller application. If necessary, thin with Farwest #602 Mineral Spirits.

CLEAN-UP: Tools and equipment may be cleaned with Farwest #602 Mineral Spirits.

LIMITED WARRANTY. To the best of our knowledge, the technical data presented above is true and accurate at the date of issuance and subject to change without prior notice. Farwest Paint Manufacturing Co. guarantees its products to conform to its standards of quality control. Liability is limited to replacement of product. No other warranty or guarantee of any kind is made by Farwest Paint Manufacturing, implied or otherwise.