FARWEST PAINT PRODUCT INFORMATION

Government Spec.-Type Coatings

TT-E-1593B High-Performance Silicone Alkyd Enamel

COLOR(S): Wide Range of Colors.

PRODUCT TYPE: Silicone Alkyd Gloss Enamel.

DESCRIPTION: Farwest High-Performance Silicone Alkyd Enamel is a durable gloss silicone alkyd enamel for use on wood, concrete, or metal surfaces. This enamel is widely used by the marine industry where an extremely durable finish is necessary to withstand all types of weather conditions.

Intended Use: For wood, concrete, or metal surfaces.

PHYSICAL CHARACTERISTICS

VISCOSITY: 67-77 k.u.

DRY TO TOUCH: 1-2 hours

WEIGHT SOLIDS: 63-65%

TACK FREE: 8 hours

VOLUME SOLIDS: 46-48%

TIME TO RECOAT: Overnight

WEIGHT PER GALLON: 9.80 lbs. per gal.

DRY HARD: 8 hours

V.O.C.: 413 grams per liter

COLOR RANGE: Wide Range of Colors

FLASH POINT: Over 105° F.

PACKAGING: 1 or 5 gallon containers

BATCH: Stock

PRACTICAL COVERAGE: 300-450 square feet per gallon depending upon surface to be coated.

SURFACE PREPARATION: Surface to be coated must be free of all loose and peeling paint, dust and grease. NEW METAL: Should be primed with an industrial alkyd primer. WOOD: New wood should be primed with Farwest #710 White Linseed Oil Primer and allowed to dry for 24 hours. Old painted wood should be sanded or wire brushed and spot primed with Farwest #710 White Linseed Oil Primer.

APPLICATION: Brush, roller, or spray.

THINNING: If thinning is necessary use Farwest #602 Mineral Spirits.

CLEAN-UP: Tools and equipment may be cleaned with Farwest #602 Mineral Spirits.

LIMITED WARRANTY. To the best of our knowledge, the technical data presented above is true and accurate at the date of issuance and subject to change without prior notice. Farwest Paint Manufacturing Co. guarantees its products to conform to its standards of quality control. Liability is limited to replacement of product. No other warranty or guarantee of any kind is made by Farwest Paint Manufacturing, implied or otherwise.