FARWEST PAINT PRODUCT INFORMATION

Government Spec.-Type Coatings

TT-P-650C Poroseal PVA Primer Sealer (Interior)

(#970)

COLOR(S): White (may be tinted).

PRODUCT TYPE: Flat Pigmented PVA Emulsion.

DESCRIPTION: A pigmented latex emulsion base wall sealer specially formulated for interior wallboard surfaces.

Intended Use: For sealing interior wallboard surfaces, interior cement block, plaster or brick surfaces.

PHYSICAL CHARACTERISTICS

VISCOSITY: 90 k.u.

DRY TO TOUCH: 30 minutes

WEIGHT SOLIDS: 44-47%

TACK FREE: 30 minutes-1hour

VOLUME SOLIDS: 29-32%

TIME TO RECOAT: 1-3 hours

WEIGHT PER GALLON: 10.53 lbs. per gal.

DRY HARD: 2 hours

V.O.C.: 27 grams per liter

COLOR RANGE: White (may be tinted)

FLASH POINT: N/A

PACKAGING: 1 or 5 gallon containers

BATCH: Stock

PRACTICAL COVERAGE: 300-500 square feet per gallon depending on the porosity of the surface to be coated.

SURFACE PREPARATION: Surface must be dry, clean and free of all foreign agents and properly prepared.

APPLICATION: Apply by brush, roller or airless spray, making certain that the surface is well sealed. Usually only one coat is required to provide adequate sealing. Allow to dry, then recoat with the desired Farwest interior paints.

THINNING: Thinning is not recommended.

CLEAN-UP: Tools and equipment may be cleaned with normal tap water.

LIMITED WARRANTY. To the best of our knowledge, the technical data presented above is true and accurate at the date of issuance and subject to change without prior notice. Farwest Paint Manufacturing Co. guarantees its products to conform to its standards of quality control. Liability is limited to replacement of product. No other warranty or guarantee of any kind is made by Farwest Paint Manufacturing, implied or otherwise.