FARWEST PAINT PRODUCT INFORMATION
Primers & Pre-Treatment Coatings
X-7024 Dark Gray Primer
COLOR(S):
Dark Gray.PRODUCT TYPE: Dark Gray Dip Primer.
DESCRIPTION: An alkyd gray primer for use on structural steel surfaces where durability combined with a fast dry condition is necessary.
Intended Use: For structural steel surfaces.
PHYSICAL CHARACTERISTICS
VISCOSITY: 55-60 k.u.
DRY TO TOUCH: 30 minutes
TACK FREE: 1 hour
TIME TO RECOAT: 3 hours
DRY HARD: 8 hours
WEIGHT SOLIDS: 62-64%
VOLUME SOLIDS: 43-45%
WEIGHT PER GALLON: 10.20 lbs. per gal.
V.O.C.: 444 grams per liter
COLOR RANGE: Gray
FLASH POINT: 50° F.
PACKAGING: 1 or 5 gallon containers
BATCH: Stock
PRACTICAL COVERAGE: 325 square feet per gallon @ approximately 2.0 mils dry.
SURFACE PREPARATION: Surface to be coated must be free of all dirt, oil and grease. Galvanized surfaces should be etched with a phosphoric etch before applying primer. Remove loose rust and scale from metal surfaces with Farwest #695 Rynolite Chemical Cleaner-Etcher.
APPLICATION: Dip tank or spray.
THINNING: Thin if necessary with Farwest #605 Synthetic Thinner.
CLEAN-UP: Equipment and tools may be cleaned with Farwest #605 Synthetic Thinner or Farwest #615 Wash Thinner.
LIMITED WARRANTY. To the best of our knowledge, the technical data presented above is true and accurate at the date of issuance and subject to change without prior notice. Farwest Paint Manufacturing Co. guarantees its products to conform to its standards of quality control. Liability is limited to replacement of product. No other warranty or guarantee of any kind is made by Farwest Paint Manufacturing, implied or otherwise.